Snelstart koppeling voor Magento 2
5.0 2 Gebaseerd op 2 beoordelingenTest out this module for Free
Snelstart koppeling
Check your email
We've sent a confirmation link. Click it to spin up your demo.
Setting up your demo...
This usually takes a few minutes. You can close this modal or wait for the result — we'll also send you an email when it's ready.
You're in the queue
Position: #
All demo slots are currently in use. You'll receive an email as soon as your demo is ready.
Your demo is ready!
Verloopt:
Credentials have also been sent to your email.
Er ging iets mis
We couldn't set up your demo. Please try again or contact support.





Naadloze Snelstart-integratie: Automatisering, Controle en Betrouwbaarheid
Onze Snelstart-integratie voor Magento 2 zorgt ervoor dat al uw bestellingen, facturen en klantgegevens moeiteloos direct naar Snelstart worden overgedragen. Met deze oplossing is uw boekhouding altijd nauwkeurig en up-to-date, wat u tijd en moeite bespaart. U kunt met een gerust hart vertrouwen op een automatische gegevensorganisatie en tegelijkertijd een helder en volledig overzicht van al uw transacties behouden.
Wat onze Snelstart-integratie onderscheidt, is de directe verbinding – zonder afhankelijkheid van externe API’s of derde partijen. Dit resulteert in snellere en betrouwbaardere gegevensoverdracht en vermindert aanzienlijk het risico op technische problemen. Volledig geïntegreerd met Magento, worden alle relevante gegevens weergegeven in de vertrouwde Magento-rasters, waardoor u volledige controle en inzicht hebt in het synchronisatieproces tussen Magento en Snelstart. Elke bestelling, klant en factuur wordt bijgehouden met gedetailleerde rasters, wat het beheer eenvoudig en efficiënt maakt.
Compatibel met Snelstart-pakketten: inMap, inBalance, inSight en inControl. Synchronisatie kan volledig worden geautomatiseerd via de Cronjob of CLI van Magento, zodat u gegevens kunt verwerken vanaf een specifieke startdatum of deze handmatig kunt beheren via het raster. Dit biedt u de flexibiliteit en controle die nodig zijn voor een stabiele en efficiënte verbinding – volledig onafhankelijk van middleware of externe systemen.
Alle gegevens op één plek
Al uw Magento 2-gegevens naadloos geïntegreerd in Snelstart, volledig geautomatiseerd en zonder gedoe, terwijl u volledige zichtbaarheid en controle behoudt.
Officiële verbinding
Erkend als een officiële plug-in voor Magento 2 en Snelstart, bieden wij met trots een betrouwbare oplossing op maat voor uw boekhoudkundige behoeften.

Algemeen synchronisatie-inzicht

Informatie per bestelling

Geavanceerde belastinginstellingen







Geen middleware nodig: directe integratie met de Snelstart API
Met deze extensie kunt u moeiteloos uw Magento 2-webshop koppelen aan Snelstart. Alle bestellingen en facturen worden automatisch doorgestuurd naar uw boekhoudsoftware, waardoor handmatige gegevensinvoer overbodig wordt. Boekhouden was nog nooit zo efficiënt en eenvoudig! In tegenstelling tot sommige andere oplossingen vereist onze integratie geen middleware. Dit betekent dat alle gegevens direct worden geëxporteerd, wat zorgt voor snelheid, betrouwbaarheid en eenvoud.
Specifiek ontworpen voor Magento 2, voldoet deze plug-in aan de nieuwste Magento- en PHP-standaarden. Het bestaat uit twee componenten:
- Een kernplug-in die alle gegevens verwerkt in een database, toegankelijk via intuïtieve rasters.
- De Snelstart-laag die de gegevens omzet en direct naar Snelstart verzendt.
Onze directe verbinding met de Snelstart API maakt externe platforms of API's overbodig, wat resulteert in een gestroomlijnde installatie en een veilige, stabiele integratie.
Wij zijn er trots op officieel goedgekeurd te zijn door Snelstart als een erkende en ondersteunde Magento-plug-inpartner, en bieden een betrouwbare oplossing op maat voor uw boekhoudkundige behoeften.
Automatiseer
Al uw gegevens worden naadloos gesynchroniseerd met Snelstart via de cronjob op de door u gewenste frequentie, zodat uw boekhouding altijd up-to-date blijft met minimale inspanning.
Neem de controle
Houd eenvoudig toezicht op alle gesynchroniseerde en openstaande gegevens via intuïtieve rasters, met directe feedback van de Snelstart API voor volledige transparantie en controle.
Geavanceerde belastingondersteuning
De plug-in bevat uitgebreide belastingondersteuning met diverse opties voor btw-regels en zones, volledig compatibel met OSS, zodat uw boekhouding aan alle fiscale vereisten voldoet.
Alleen voor Magento
Speciaal ontwikkeld voor Magento 2, voldoet deze extensie aan de Magento-codeerstandaarden en maakt gebruik van de Magento UI, waardoor u naadloos inzicht krijgt binnen de vertrouwde interface.
Inzicht in alle API-communicatie
Boekhouding is een cruciaal onderdeel van uw bedrijf, en het nauwkeurig en up-to-date houden ervan is essentieel. Met deze Snelstart-extensie van Magmodules hoeft u zich geen zorgen meer te maken over handmatige processen of vertragingen in uw administratie.
Neem de controle
Volledige controle en inzicht behouden is net zo belangrijk. Daarom bevat deze extensie een uitgebreide logfunctie. Hiermee kunt u direct alle verzamelde gegevens per bestelling bekijken, controleren of een factuur is aangemaakt en bevestigen of deze succesvol naar Snelstart is verzonden. Informatie over creditnota's wordt ook duidelijk weergegeven. Alle relevante gegevens worden gepresenteerd in een overzichtelijk en gestructureerd dashboard, waardoor u in één oogopslag volledige transparantie krijgt.


Synchroniseer alle klanten met Snelstart
Deze boekhoudextensie zorgt ervoor dat alle klantgegevens uit uw Magento-webshop direct worden gesynchroniseerd met Snelstart. De sectie ‘relaties’ in Snelstart blijft perfect op één lijn, zodat u eenvoudig facturen en klanten kunt koppelen. Binnen Magento kunt u synchronisatiedetails voor elke klant bekijken, inclusief het exacte tijdstip waarop ze met Snelstart zijn gesynchroniseerd. Daarnaast is er een volledig overzicht beschikbaar, waarin u alle klantensynchronisatiegegevens in één oogopslag kunt zien.
Directe verbinding met de Snelstart API
Veel boekhoudplug-ins vertrouwen op externe API’s als middleware-platforms, maar wij hanteren een andere aanpak. Onze extensie maakt rechtstreeks verbinding met de Snelstart API. Dit zorgt ervoor dat alle gegevens nauwkeurig worden overgedragen en voldoen aan de standaarden van Snelstart.
Dankzij deze directe verbinding verlopen gegevensoverdrachten snel en veilig. Als Snelstart zijn software bijwerkt, kan de integratie onmiddellijk worden aangepast om een naadloze functionaliteit te behouden.
Btw-regels en OSS-ondersteuning
De extensie biedt uitgebreide opties voor het configureren van btw-regels en zones. Via geavanceerde instellingen kunt u eenvoudig bepalen welke btw-regels van toepassing moeten zijn in gevallen waarin geen automatische match kan worden gemaakt, zoals na een migratie of bij het importeren van bestellingen. Deze flexibiliteit zorgt voor nauwkeurige belastingberekeningen en naleving van lokale regelgeving.
OSS-ondersteuning
Naast de standaard btw-regels biedt de extensie volledige ondersteuning voor het OSS (One Stop Shop)-systeem. Hiermee kunt u btw-betalingen voor de hele Europese Unie regelen via één lidstaat, wat naleving vereenvoudigt en de administratieve last vermindert.


Eenvoudige en gedetailleerde configuratie
De extensie is ontworpen voor een eenvoudige installatie en is toegankelijk voor zowel beginnende als gevorderde gebruikers. Het bevat alle benodigde instellingen om een volledige koppeling tussen Magento 2 en Snelstart te creëren.
Om de integratie op te zetten, voert u eenvoudig uw Snelstart API-inloggegevens in, samen met een gebruikersnaam en beveiligingscode. Zodra de configuratie is voltooid, worden alle gegevens op winkelniveau gesynchroniseerd met uw Snelstart-account, waardoor een naadloze communicatie wordt gegarandeerd.
De configuratie biedt ook de mogelijkheid om verschillende grootboekrekeningen te koppelen en te kiezen hoe de synchronisatie wordt uitgevoerd – via cron of CLI-opdrachten. Geavanceerde opties omvatten functies zoals het toevoegen van een voorvoegsel aan (credit)facturen, wat vooral handig is bij migraties of wanneer u met meerdere winkelweergaven werkt. Dit niveau van flexibiliteit zorgt ervoor dat de integratie perfect aansluit op uw specifieke behoeften.
De voordelen voor Ontwikkelaars
- Volledig getest op Magento 2.3.x en 2.4.x
- Ontwikkeld volgens de nieuwste PHP-standaarden
- Uitgebreide CLI-opdrachten beschikbaar
- Logging toegankelijk via het back-end raster
- Logging ook beschikbaar in de var/log-map
- Eenvoudige koppeling van Magento-btw-regels
- Directe ondersteuning en contact met de ontwikkelaars
Goed om te weten voor Winkel-eigenaren
- Directe integratie zonder afhankelijkheid van een extern platform
- Veilige overdracht van klant- en boekhoudgegevens
- Ondersteuning beschikbaar in zowel Nederlands als Engels
- Flexibele prijsopties: maandelijks of eenmalige betaling
- Gratis ondersteuning en updates gedurende de eerste 6 maanden
- Meerdere opties voor het koppelen van btw-regels
- Specifiek ontwikkeld voor Magento 2
2 van vele klanten
Beoordeeld deze plugin met een 10 van de 10
Werkt als een zonnetje
Review van een zeer tevreden klant
Vandaag de koppeling laten instaleren, dit werd netjes conform afspraak geregeld.
Het verder installeren was super eenvoudig, binnen enkele minuten werkte het perfect.
Sinds een jaar ben ik klant bij SnelStart en heb 2 koppelingen hiervoor geprobeerd, dat was echt drama, na goed gesprek met Frank -klantenservice van MagModules voor de 3e keer een poging gewaagd.
Dit werkt gewoon wel, Frank bedankt over een tijdje zal ik de review verder aanvullen.
Kennisbank
Alle bekende helpartikelen
Een lijst met de meest gestelde vragen over de Snelstart koppeling-extensie voor Magento 2. We hebben ons best gedaan om je te helpen met de installatie, configuratie en probleemoplossing. Als je het antwoord dat je zocht niet kunt vinden, kun je ons altijd een bericht sturen via dit formulier.
Wijzigingslogboek 3.1.0 is uitgebracht op 3 November 2026
Onze plug-ins worden regelmatig bijgewerkt om compatibiliteit met de nieuwste Magento-versie te garanderen.
-
Features:
- Added an option to rebuild the invoice and credit memo lines from Magento just before they are sent, so changes made after queueing are included; lines edited by hand in the order tab are never overwritten (Advanced > Recalculate, enabled by default).
- Cached ledgers, cost centres and countries are scoped to the administration instead of to a hash of the client key, so regenerating the key keeps them; existing rows are relinked on upgrade. Improvements:
- A synchronisation run works through the whole queue instead of one page of it, for at most ten minutes per run; Batch Size was a cap per run, so a shop with more invoices a day than the batch fell further behind every night.
- Retries use exponential back-off that honours Retry-After, never repeat a booking SnelStart did not refuse outright, and a failed call says whether sending it again could help. Bugfixes:
- "Select All" on the invoice and credit memo queue grids acts on exactly the rows the grid shows, within its filters; with Accounting Base before 3.0.8 a select-all resolved to nothing or, for a remove, to the whole table. Needs Accounting Base 3.0.8.
- The synchronisation is scheduled on a fresh install; the frequency had no default, so the job waited until someone opened the configuration and saved it.
- The synchronisation schedule is read straight from the frequency the admin sets instead of from a copy written on save; the copy is removed on upgrade, and clearing the frequency now stops the synchronisation.
- Fixed the synchronisation schedule being written empty, which stopped the cron from running.
- Records that failed once are retried on the next run.
- An invoice SnelStart rejects is marked failed on that run instead of three runs later.
- A rejection carrying only field-level errors is no longer read as a successful result, which marked an invoice as synced that SnelStart never accepted.
- The rejected field names are kept in the error, so a failed invoice shows why.
- A failure reported with a 200 status is no longer retried as if the platform were unavailable.
- An unexpected response from the booking lookup means no existing booking was found, instead of raising a PHP error that was recorded as the reason the invoice failed.
- The relation name, postcode, city, contact person and VAT number are cut to the length SnelStart accepts; over it, SnelStart rejected the whole relation and the invoice behind it never got booked.
- Fixed the configuration page returning a 500 on PHP 8.5.
- Fixed the OSS date field importing from the wrong namespace.
- Fixed the cost centre lookup returning nothing on failure instead of null. Tests:
- An architecture test refuses a CLI command dependency that is not wired as a proxy in di.xml, so a fresh installation never loads the SnelStart services before the store configuration exists.
- Added a unit test harness, contract tests against the pinned SnelStart B2B v2 specification with a weekly check that reports when SnelStart changes it, and an end-to-end flow suite against a stand-in SnelStart API reached through a hidden developer setting.
- Added end-to-end flows for "Select All" on the queue grids and for a cron run draining a queue larger than the batch size; static analysis raised to PHPStan level 2 with its findings closed. Compatibility:
- Magento 2.3.x and up
- PHP 8.1 and up
- Accounting Base ~3.0.8
-
Improvements:
- Added unit tests for customer matching and cron scheduling.
- Restored coding-standard, lint, PHPStan and PHP compatibility checks. Bugfixes:
- Fixed duplicate SnelStart relations by improving VAT number matching and reusing previously synced customers.
- Improved relation matching when multiple customers share an e-mail address.
- Fixed customer sync payload and cron scheduling issues.
- Improved authentication errors and PHP 8.4/8.5 compatibility. Minimum requirements:
- Magento 2.3.x & PHP 8.1
-
Bugfixes:
- Fixed DI compilation crash caused by virtualType plugins in Magento 2.4.6 and 2.4.7. Minimum requirements:
- Magento 2.3.x & PHP 8.1
-
Improvements:
- Added compatibility for Magento 2.4.9.
- Added compatibility for PHP 8.5. Minimum requirements:
- Magento 2.3.x & PHP 8.1
-
Features:
- Added inline editing for booking rules on the accounting order tab.
- Added inline VAT code editing on the order accounting tab.
- Added modal for debugging API calls.
- Added configurable OSS country source (shipping or billing address).
- Updated cost center column on order tab to only display when enabled. Improvements:
- Increased minimum accounting-base version requirement to ~3.0.0.
- Increased minimum PHP version requirement to 8.1.
- Refreshed admin UI with new branding and compact button styling.
- Improved version check using semantic version comparison.
- Added ACL protection to all admin controllers and providers.
- Improved code quality with strict comparisons and Throwable catch blocks. Compatibility:
- Magento 2.3.x and up
- PHP 8.1 and up
- Accounting Base ~3.0.0
-
Improvement:
- Add batch limiting.
- Fix dangling transaction rollback in recalculate.
- Improve cron error handling. Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~2.4.0
-
Bugfixes:
- Fixed issue with the 'Hoog' VAT code on shipping prices without VAT.
- Fixed issue with tax calculation in combination with exchange rates. Compatibility:
- Magento: 2.3.x & 2.4.x
- Accounting Base: ~2.4.0
-
Features:
- Added support for PHP 8.4
- Added support for Magento 2.4.8 Improvements:
- Added more DB indexes for better grid performance Compatibility:
- Magento: 2.3.x & 2.4.x
- Accounting Base: ~2.4.0
-
Features:
- Added new CLI command to fetch data from SnelStart (accounting:check:snelstart) Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~2.3.0
-
Bugfixes:
- Fixed support for orders that have hight item collection (> 250 items) Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~2.3.0
-
Features:
- Added new Advanced Ledger config option for more flexibility
- Added new Advanced One-Stop-Shop mapping for more flexibility Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~2.3.0
-
Changes:
- Up minimum requirements for Accounting Base to ~2.3.0 Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~2.3.0
-
Bugfixes:
- Fixed issue with truncating empty street
- Also make sure Factuurbedrag is in euro while using exchange rates Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~2.1.0
-
Features:
- Added {transaction_clean} to description parser Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~2.1.0
-
Bugfixes:
- Fixed issue with unused class in constructor
- Fixed incompatibility with PHP 8.2 Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~2.1.0
-
Features:
- Upped version to 2.1.1 Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~2.1.0
-
Changes:
- Make sure telephone number is not bigger than 25 characters
- Make description field in invoice/creditmemo data dynamic Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~2.0.0
-
Changes:
- Added customer telephone number to synced data
- Also catch exceptions on HTTP status code 100 Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~2.0.0
-
Features:
- Added support for PHP 8.1 and Magento 2.4.4
- Replaced observers in favor of plugins
- Added support for Mollie Payment Fee (base)
- Added support for Sisow Payment Fee (base) Bugfixes:
- Use shipping country for One-Stop-Shop implementation Changes:
- Moved Accounting Order tab to Base Module Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~2.0.0
-
Features:
- Add force delete for creditmemo and invoices and fixed removal option Bugfixes:
- Fix for Interceptor classes Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~1.5.0
-
Features:
- Added support for One Stop Shop Bugfixes:
- Fixed ledgers for orders within EU with tax (B2C)
- Fixed remove function for credit memos Changes:
- Catch more sync errors in API adapter Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~1.4.0
-
Fixes:
- Save correct StoreID to invoice and creditmemo
- Fixed creditmemo implementation Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~1.3.1
-
Fixes:
- Fix table prefixes for data join on credit memo and invoice grids
- Disable 'load info from SnelStart' button is there is no active connection Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~1.3.1
-
Fixes:
- Apply paging for getting Ledgers to overcome limit of 500 ledger accounts Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~1.3.1
-
Changes:
- Make Logger component compatible with Monolog 2.0
- Refactored API adapter to catch issues with customer saving Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~1.3.1
-
Fixes:
- Fixed creditmemo item and extra item data
- Added SnelStart ID to log table Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~1.3.1
-
Features:
- First public release Compatibility:
- Magento: 2.3.x & Magento 2.4.x
- Accounting Base: ~1.3.1
100% Ongecodeerde codekwaliteit gegarandeerd.

Adobe Commerce Goedgekeurd door Marketplace
Deze extensie staat op de officiele Adobe Commerce Marketplace en heeft het reviewproces doorlopen op codekwaliteit, performance en beveiliging.
Goedkeuring via de Adobe Marketplace betekent dat de extensie voldoet aan de Magento coding standards en correct integreert met het platform. Updates doorlopen hetzelfde reviewproces.

Hyvä Compatibele Plugin
Deze extensie biedt volledige ondersteuning voor Hyva Themes. Alle frontend-componenten, widgets en templates werken native met Hyva's Alpine.js en Tailwind CSS stack.
De extensie werkt direct op Hyva en wordt bij elke nieuwe Hyva-release getest om compatibiliteit te blijven garanderen.

GraphQL Klaargemaakt
Deze extensie stelt data en configuratie beschikbaar via Magento's GraphQL API. Je kunt data direct opvragen en muteren vanuit headless frontends of eigen applicaties.
Het GraphQL-schema volgt de conventies van Magento en dekt alle kernfunctionaliteit van de extensie. Hierdoor is het geschikt voor PWA Studio, Vue Storefront of elke andere headless setup.

Magento Cloud Ondersteuning
Deze extensie is volledig compatibel met Adobe Commerce Cloud (Magento Cloud). Het werkt met het read-only filesystem, de build- en deploy-pipeline en cloud-specifieke caching-lagen.
Er is geen extra configuratie of workaround nodig voor cloud-omgevingen. De extensie gaat op dezelfde manier om met static content deployment en configuratiebeheer als bij on-premise installaties.

Privé Composer Repo
Na aankoop krijg je toegang tot een prive Composer-repository met persoonlijke credentials. Installeer en update de extensie met een enkel composer-commando, net als elke andere dependency.
Je Composer-credentials zijn beschikbaar in je accountdashboard. Updates worden gepubliceerd zodra een nieuwe versie beschikbaar is, zodat je altijd toegang hebt tot de laatste versie.
Playwright E2E Tests (26)
This extension is covered by 26 end-to-end tests using Playwright. These tests run automatically on every code change through our CI/CD pipeline.
The tests simulate real user interactions across checkout flows, configuration changes and edge cases to make sure everything works before every release.